The specific steps used in slag cone operation

Compared with the traditional slag ball, because it also contains a guide rod structure, it can be inserted into and out of the steel nozzle according to the promotion of the slag cone, so that the slag cone is specified accurately, and then the slag is reasonably blocked, and the actual effect of the prediction is reasonable to ensure.

Slag cone operation steps:

The slag retaining cone for converter steelmaking comprises a cone, a guide rod and a rod core, the guide rod is widened into the cone and connected with the rod core, the cone is provided with a concave part, the guide rod is provided with a convex part matched with the concave part, the bottom end of the concave part is provided with a cone hole, the convex part is provided with a cone type convex part matched with the cone hole, and the top of the cone is provided with a nut matched with the rod core, The upper side of the rod core is provided with a sign plate, the guide rod is provided with an anchor bolt hole, and the raised part is provided with an anchor bolt matching with the anchor bolt hole to fix the fixed projection part.

Slag cone price slag cone advantage

Cinder cone test results:

Specification: cone weight 33kg rod weight 5kg spherical diameter 260Mm

1. Under the condition of high steel temperature, the accuracy rate of cone casting in the experimental furnace can reach 100%, and there is no cone melting slag condition.

2. Due to the application of newly marketed steel ports, the filter steel time of the first three furnaces is longer, exceeding 300s. If the first three furnaces are removed, the average filter steel time is 75. Three seconds, recover the filter steel time, considering the production rhythm.

3. Feedback from manufacturers The application of the new slag cone has good actual effect, and it is more comfortable to use.